tape drive
美 
英
英汉解释
例句
It was easy to do, as long as the server had a tape drive in it.
这种方法很容易实现，并且只需要服务器上安装磁带驱动器即可。
Before that only a single contact with the tape drive (only a box of tapes), hoping that the specific point of the best, thank you.
之前只接触过单一的那种磁带机（只能放一盒磁带），如果能具体点最好了，谢谢。
In the Back up to list-box, select the path of the disk or tape drive you want to view, and click Contents.
在“备份到”列表框中，选择要查看的磁盘或磁带机的路径，再单击“内容”。
This setting controls the size of each block, and should be set to your tape drive's block size.
此设定控制了每个块的大小，而且应该和您磁带磁碟机的块大小保持一致。
Additionally, for the given tape drive, we recommend that you use only tapes recommended by the drive manufacturer.
另外，对于给定的磁带机，我们建议您仅使用磁带机制造商推荐的磁带。
When the tape drive cleaning is finished , insert the tape for the next scheduled backup.
在磁带驱动器清洗完成后，插入下次计划的备份所需要的磁带。
The tape drive emulator may mechanically actuate the ZIF socket upon sensing the insertion of the electrical into*ce of the data cartridge.
所述的磁带驱动模拟器在检测到数据卡带电接口插入时，可以机械地驱动ZIF插槽。
The process of removing a volume from a tape drive and mounting the next volume of the set.
从磁带设备上卸下一个卷，再安装上同一数据集下一个卷的处理过程。
If this option is disabled, you do not have a tape drive on your computer or your tape drive cannot manage compressed data.
如果此选项是禁用的，则说明您的计算机上没有磁带驱动器，或者磁带驱动器无法管理压缩的数据。
An inch long piece of aluminum glued on the tape signalling the tape drive to begin a valid tape.
粘结在磁带上的一英寸长的铝片，用来指示磁带已驱动到有效部分的始端。
Reliability Measurement in the Tape Drive and Related Electronics Industries Paul Jaramillo of Quantum Corp.
在磁盘驱动器和相关电子产业中的可靠性度量。
To back up to tape, you must specify the device name of the tape drive.
要备份到磁带，必须指定磁带驱动器的设备名。
This may be a local tape drive or a tape-based logical backup device created for the database.
这可能是一个为该数据库创建的本地磁带机或磁带备份设备。
A message is sent to the application that issued the BACKUP statement if the tape drive requires intervention.
如果磁带驱动器要求干预，一条消息将发送到发出BACKUP语句的应用程序。
With a p5 system that has multiple LPARs, this process becomes a little more cumbersome if you order a tape drive.
在具有多个LPAR的p5系统中，如果您采用磁带驱动器，那么这个处理过程将变得比较复杂。
Tape device not ready or available. Please make sure no other applications are using your tape drive, check your tape and try again.
磁带设备没有准备好或不可用。请确保没有其它应用程序在使用磁带驱动器，检查您的磁带然后重试。
You can back up the server to a tape drive or hard disk.
您可以将服务器备份到磁带驱动器或硬盘。
When I place the same tape in a local tape drive, I can list the index and recover the files with no problems.
当我将同一个磁带放入本地磁带驱动器中，我能够正确的将索引列表并恢复文件。
Remember to clean the tape drive before the next server backup.
请记住在下一次服务器备份前清洗磁带驱动器。
You can control whether a backup tape is unloaded automatically from the tape drive after a backup or restore operation.
您可以控制在备份或还原操作后备份磁带是否自动从磁带机卸载。
For more information about settings that affect tape drive performance, see the tape drive vendor's documentation.
有关影响磁带机性能的设置的更多信息，请参阅磁带机供应商文档。
An optional user-defined name that points to a specific physical backup device, such as a disk file or tape drive.
指向特定物理备份设备（如磁盘文件或磁带机）的可选的用户定义名称。
A particular tape drive can use different density device files; they are not limited to only one density.
一个特制的磁带可以应用不同密度的设备文件；他们不局限于一种密度。
A device containing a tape drive , magnetic head, and associated controls.
包括磁带驱动器、磁头和相应控制器的一种装置。
The operation was aborted, even if the tape is in the tape drive.
作业已结束，即使磁带已位于磁带机上。
Specifies that after the RESTORE operation the tape will remain loaded on the tape drive.
指定在RESTORE操作之后磁带将继续加载在磁带机中。
For more information about data compression, see the tape-drive vendor's documentation.
有关数据压缩的更多信息，请参阅磁带机供应商文档。
If an error occurred on a tape device, you can clean or replace the tape drive.
如果磁带设备发生错误，可卸下或更换磁带机。
If you hear the tape drive moving, wait until it stops and then try mounting it again.
如果您听到了磁带的转动，等它停转，然后重新尝试挂载。
The destination can be either a file name or a tape drive device name.
目标可以是文件名或磁带驱动器设备名。
Improperly linked tape drive channel.
磁带驱动器频道链接不当。
VIOs Virtual tape drive support for client LPARs is another new offering that allows client LPARs access to SAS tape resources.
客户端LPAR的VIO虚拟磁带驱动器支持是另一个新创新，该特性允许客户端LPAR访问SAS磁带资源。
All these device files contain different attributes but refer to the same physical tape drive, 0, and can be used at will.
所有这些设备文件包含了不同属性，但都引用了相同的物理磁带驱动器0，且能任意使用。
When a tape drive is used, a backup operation may fill one tape and continue onto another tape.
在使用磁带机时，备份操作可能会写满一个磁带，并继续在另一个磁带上进行。
To first check if the AIX recognizes the 4mm tape drive, type lsdev -Cc tape and ensure that the 4mm tape drive is 'Available'.
首次检查AIX能否识别4mm磁带驱动器时，键入lsdev-Cctape并确保4mm磁带驱动器为“Available”。
Before creating the mksysb image, you need to allocate the tape drive to the LPAR you want to back up.
在创建mksysb镜像之前，您需要为希望备份的LPAR分配磁带驱动器。
To mount (a magnetic tape) onto a tape drive.
把（磁带）装入录音机
Select a tape drive to use for restore.
选择用来还原的磁带机。
Never place a tape drive on the same SCSI bus as disks or a CD-ROM drive.
永远不要将磁带机与磁盘或CD-ROM驱动器放置在同一个SCSI总线上。
The backup device is a tape drive.
备份设备是磁带机。
